Interior Care

Swissvax Fabric is a textile cleaner concentrate that is mixed with carbonated mineral water in the appropriately scaled Swissvax Mixing Bottle. By spraying the ready-to-use mixture, it allows for thorough, effortless, and gentle cleaning of textiles such as fabric upholstery, vehicle carpets, headliners, or fabric convertible tops. A significant advantage over foam-based textile cleaning products lies in the better fine dosage, which avoids so-called "cleaning rings" on the surface to be cleaned. In combination with the Swissvax Mixing Bottle, Swissvax Fabric is an unbeatable tool for refreshing and cleaning all types of textiles.

Application of FABRIC Textile Cleaner

1. Fill the Swissvax Mixing Bottle with carbonated mineral water up to the "1:2" mark.

2. Add Swissvax Fabric Concentrate up to the "1:3" mark.

3. Gently swirl the Mixing Bottle.

4. Spray the Swissvax Fabric mixture evenly over the surfaces to be treated and allow it to act for 1–2 minutes.

5. Lightly rub the surface with a soft brush or a clean Swissvax cloth and allow it to dry.

6. Thoroughly vacuum the dry surface.

7. Be sure to re-impregnate cleaned surfaces.

Alcantara

Seats and interior trims covered with Alcantara (synthetic velour leather) are durable. However, when Alcantara is cleaned, care must be taken. The use of conventional cleaners is often problematic, as they may contain solvents that can weaken the Alcantara synthetic fibers. Alcanta Cleaner contains biodegradable ingredients and has been specifically developed for the regular cleaning of synthetic velour leather.

Application of ALCANTA CLEANER

1. Spray Alcanta Cleaner onto a clean sponge or directly onto the surface. Clean the entire area by dabbing with medium pressure.

2. For more heavily soiled areas, spray Alcanta Cleaner and work it in with a Swissvax cleaning brush using circular motions without applying pressure.

3. Dab dry with a soft cotton cloth. Do not rub!

Well-Maintained Interior in Minutes

Swissvax Quick Interior Finish quickly removes dust, grease, and dirt from plastics, painted surfaces, leather, and metal surfaces in the interior, leaving a well-maintained finish.

Application of QUICK INTERIOR FINISH

1. Remove loose dirt from the interior using a vacuum cleaner with a narrow nozzle.

2. Shake the bottle well.

3. Spray Swissvax Quick Interior Finish onto a clean Swissvax Micro-Wash microfiber cloth (yellow) and spread evenly.

4. Turn the microfiber cloth over and polish with the dry side.

How to Care for Fine Wood

Fine wood interior trim requires special care. Most fine woods are protected by several thin layers of clear lacquer. For this, there is Swissvax Wood Polish, a long-standing insider tip among Concours participants. This incredible wax for glossy and matte lacquered woods is based on pure yellow Brazilian Grade-One Carnauba wax, providing unmatched shine along with long-lasting care and protection.

Application of WOOD POLISH

1. Apply Swissvax Cleaner Fluid Regular to the wooden surfaces using a Swissvax cotton applicator (white).
   
2. Work it into the wooden surfaces with an even up-and-down motion.
   
3. Polish with a clean Swissvax cloth.
   
4. Warm Swissvax Wood Polish with a slight circular motion of your finger and apply sparingly and without pressure using your fingertip. Let it sit for 5 minutes.
   
5. Polish to a shine with a clean Swissvax Micro-Polish microfiber cloth (blue).

Plastic Cleaning and Care

Plastic cleaning and care are like skincare: deep cleaning comes first, then care. Only deep-cleaned pores provide the basis for a flawless finish. For impeccable deep cleaning, use Swissvax Plastic Wash – and for subsequent deep care, use Swissvax Protecton or Protecton Matt.

For best results, apply Swissvax Protecton or Protecton Matt with a Swissvax sponge applicator (black). Use a Swissvax detail brush for hard-to-reach areas (e.g., air vents).

For quick plastic cleaning and care, Swissvax Nano Express, which can be used across various materials, works excellently outdoors as well.

Application of PLASTIC WASH

1. Wipe the plastic or vinyl surfaces to be cleaned with a damp Swissvax Micro-Wash microfiber cloth (yellow).

2. Spray Swissvax Plastic Wash onto a clean Swissvax Micro-Wash microfiber cloth (yellow) or directly onto the plastic surface and spread evenly over the entire area.

Work in with medium pressure. Depending on the level of dirt, spray more Swissvax Plastic Wash and change the cloth. Use a Swissvax cleaning brush for textured surfaces.

Wipe down with a slightly damp Swissvax cloth.

Application of PROTECTON

1. Remove dirt from upholstery or plastic trim. Dirty plastics are best cleaned with Swissvax Plastic Wash. Dish soap often works wonders for steering wheels and gear knobs as it is extremely degreasing.
2. Then apply Swissvax Protecton with a Swissvax sponge applicator (black).
3. Let it sit. The milky-white film will transform into a deep black appearance.

Application of PROTECTON MATT

1. Clean and dry plastic or vinyl surfaces.
2. Shake the bottle well.
3. Apply Swissvax Protecton Matt evenly with a Swissvax sponge applicator (black) using firm pressure.
4. After about 20 minutes, the matte finish will become visible.